HPW-7000-D
Diesel Portable & High Power Arc Welding Generator Machine powered by HPM.This Welding Generator is suitable for High Class, All type Welding Including Structural Welding Rods 7018 Size 4mm Electrode & other Hard Facing Electrodes. Most suitable for Big Diameter Pipe Line welding.
| Maximum Output (Duty Cycle 60%) | 225 Amps. |
| Maximum Output (Duty Cycle 100%) | 200 Amps. |
| Working Voltage | 20v to 35 v |
| Open Circuit Voltage | 65 Volt (Minimum) |
| Current Regulation Amps | *60-225 |
Related Products
-
HPW-350-Diesel-AC
Diesel Portable Welding Generator Machine powered by HPM. This Welding Generator is suitable for High Quality & All types of Welding, Including Structural Welding Rods 7018 Size 5 mm Electrode & hard facing Rods.Most suitable for Big Diameter Pipe Line welding, Railway jobs
Maximum Output (Duty Cycle 60%) 325 Amps. Maximum Output (Duty Cycle 100%) 275 Amps. Working Voltage 20v to 39 v Open Circuit Voltage 80 Volt (Minimum) Current Regulation Amps *60-325 -
GE-W-8000-D
High Power Diesel Portable Arc Welder Generator Machine powered by HPM. This welding generator is suitable for All types of General Purpose Structural Welding, Light, & Heavy Welding Jobs, up to 5 mm Electrode.In built AC 230 volt – 50 Hz, 5 KVA for AC Appliances.Low Running Cost due to Diesel Engine
Maximum Output (Duty Cycle 60%) 250 Amps. Maximum Output (Duty Cycle 100%) 200 Amps. Working Voltage 20v to 35v Open Circuit Voltage 65 Volt (Maximum) Welding Current Regulation (Amps) 75 – 250 AMPS -
GE-3P-W-8000-D
Diesel Portable Arc Welder Generator Machine powered by HPM.This welding generator is suitable for All types of General Purpose Structural Welding, Light, & Medium Welding Jobs, up to 4 mm Electrode.In built AC 230 volt – 50 Hz, 3 KVA – Single Phase.In Built AC 415 Volt – 50 Hz, 5 KVA- 3 Phase.Can run all AC Appliance including 3 Phase Motors
DC Welding Output (Duty Cycle 60%) 200 Amps. Working Voltage 20 v to 35 v Open Circuit Voltage (OCV) 65 Volt (Minimum) Current Regulation 75-200 Amps. Rectifying Mode SCR, Phase Controlled 3-phase, Rectifying Bridge -
GE-W-5500-D
Portable Arc Welding Generator Machine powered by HPM.This welding generator is suitable for General Purpose Structural Welding, Light and medium Welding Jobs, up to 3.2 mm Electrode. In built AC 230 volt – 50 Hz, 2 KVA for AC Appliances.Lowest Running Cost due to Small Diesel Engine, Consumes only 0.5Ltr. Diesel per Hour.
Maximum Output (Duty Cycle 60%) 150 Amps. Maximum Output (Duty Cycle 100%) 140 Amps. Working Voltage 18v to 28 v Open Circuit Voltage 50 Volt (Maximum) Current Regulation Amps *50-150 Amps.
